Home is the IP address that is common to all. All the devices used to have the main IP address and alternative IP address as well. It is so because if one doesn’t work, then the other can help. So, the IP either will be the main IP address for the extender or the alternative one. So, it is important to know about the steps to complete Wireless Extender Setup. With admin setup, you can configure your network. 

It is very important to do the configuration of the network as an open network is always vulnerable to threats. To make your network secure, it is important to configure your network with Wireless Extender Setup. So, this article will help you to know about the steps for completing the configuration for the IP address So, it is going to cover the steps for the setup, configuration and the troubleshooting as well. Now, it’s time to find out all the details about in detail.

Steps To Complete The Wireless Extender Setup

Following the right steps is always used to make the setup process easy. Therefore, it becomes very important to go with the right procedure as skipping one step can create trouble. In the following steps, the every minor delta is covered to help you with Wireless Extender Setup:

Step 1: First, plug in your wireless extender to the power source.

Step 2: Make sure you are connecting the extender near to the router or in the same room for the setup procedure.

Step 3: Now, connect your system with the extender’s network either via wireless method or via ethernet cable.

Step 4: On using the wireless method, use the default password mentioned on the extender if the prompt asks on connection.

Step 5: Now, open Google Chrome, or any other favourite browser of yours in the system.

Step 6: Next, type the important IP address i.e. as the URL.

Step 7: This will open the login screen, or sometimes, the setup wizard for the extender depending upon the brand.

Step 8: In both, the first step is completing the signup process using the default username and password.

Step 9: Check the default username and password on the extender, and enter them in the login fields.

Step 10: Click on the Sign In or Login button and reach the admin dashboard.

Step 11: Now, the list will open for the main existing networks in your range.

Step 12: Select the name of wiFi network which you want to extend and click on the Next button.

Step 13: Then, enter the password for the selected WiFi network and complete the connection.

So, this will complete the wireless extender setup, and your network gets extended. But, this only completes the setup. To make it more secure, you need to configure it like changing its username or password.

Steps To Configure Admin Setup

The very first step to make your network secure is to change the default username and password for the admin. With this, your network will not remain open,and everyone will not have the access to it. So, following are the steps to change the username and password for your extender:

Step 1: Now, select the option of the Wireless Settings from the tabs on the admin dashboard.

Step 2: You will see the option of the Wireless SSID Network Name.

Step 3: Here, you can enter the name of your extender’s network of your choice.

Step 4: To change the default password to get connected with the extender’s network, click on the Key option.

Step 5: Here, you will enter the desired strong password to avoid the open access to the network.

Step 6: Also, set the wireless encryption method to the WPA2/PSK and enable the Broadcast SSID.

Step 7: Save all the settings you have made to apply that to the network.

So, these are the steps for the basic configuration. Similarly, you can select the other options to change the settings of your network. These configuration settings include filtering the MAC address of the devices that can access the network. It will not let the outsiders reach your network. So, these are the ways with which you can make your network secure with the configuration. But sometimes, due to some reasons, you may get the issues with the setup process. For that, you need to follow the troubleshooting process to complete the setup in a proper way.

Troubleshooting For Setup

There can be different reasons which may lead to not accessing the setup page. These can be internal or external as well like dynamic IP addressing or loose connections respectively. Therefore, you need to go with the following troubleshooting steps in order to complete the setup:

Step 1: Make sure the IP address has not changed with dynamic settings.

Step 2: Also, ensure that all the wired connections should be properly secured.

Step 3: Re-check the default login details as wrong details will lead to a problem.

Step 4: Disable the firewall settings for sometime as it may block the IP address of the extender.

Step 5: If none of the steps work, then reset the extender to refresh the device.

In this way, the instant troubleshooting can be done to access the login page for the IP address. So, now you can complete the Wireless Extender Setup, and access the network in dead zone areas.

No More Dead Zones!

Wrapping up! There is no doubt that the process for Wireless Extender Setup is easy. But, if a single step is mistaken then all efforts will go in vain. Therefore, it is very important to follow the steps to complete the admin setup mentioned in this guide. Moreover, there is nothing wrong to say that it is a complete guide as it contains all the important details. So, have no more dead zone areas at your home by setting up the wireless extender.